Call us(818) 812-0735 Free Estimate
ADUsKitchensBathroomsService AreasFinancingBlogContactCall (818) 812-0735Get My Free Estimate Range

Home  /  Blog  /  Article

September 22, 2026

Design Build Versus General Contractor in LA

The design build versus general contractor question is not really about construction. It is about who holds the contract with the architect and the engineer, and therefore who is responsible when the plans and the built work disagree. Everything else follows from that one answer.

In Los Angeles this matters more than it does in most places, because the plan set has to survive LADBS plan check, and somebody has to pay for the revisions when it does not.

Design build versus general contractor: the actual difference

Design build means one contract. The design professional works under the builder, or inside the same company. You sign once. When the drawing is wrong, that is an internal problem, and the correction does not arrive as a change order with your name on it.

Design bid build, the traditional general contractor model, means two contracts. You hire an architect or engineer, you get a permitted plan set, then you take that set out to contractors and hire one to build it. You own the drawings, and you own the gap between the drawings and the field.

Neither is better in the abstract. They fail differently. Design build fails when the builder controls the design and quietly designs toward what is easy to build. Design bid build fails when the plans miss something and each side points at the other while the schedule burns.

Who is allowed to draw your plans in California?

Homeowners are usually surprised by this one. Under Business and Professions Code 5537(a), an unlicensed person may prepare plans for single-family dwellings of woodframe construction not more than two stories and basement in height, for up to four woodframe dwelling units on the same terms, and for garages and other structures appurtenant to those buildings.

There is a limit inside that exemption, and it is the important part. If any portion of the structure falls outside substantial compliance with conventional framing requirements for woodframe construction, a licensed architect or registered engineer has to prepare those plans.

In practice that means a straightforward Valley bedroom addition or garage conversion may legally be drawn by a competent designer, while a long span, a large opening in a shear wall, a raised roof or a hillside condition pulls a licensed engineer into the job whether anyone planned for it or not.

Ask who is drawing, ask whether they are licensed, and ask what happens at the moment the project crosses that line. That question separates a real proposal from a number.

What a Class B general contractor is licensed to do

Under Business and Professions Code 7057, a general building contractor's principal business is work on a structure that requires in its construction the use of at least two unrelated building trades. A Class B holder can take a project involving two or more unrelated trades and subcontract the specialty work to licensed trades.

The corollary is the part homeowners miss: a Class B contractor generally cannot take a project that involves only one trade unless they also hold that specialty license or subcontract it to someone who does. If your entire job is a re-pipe, you are looking for a C-36, not a B.

Side by side

Design buildGeneral contractor, design bid build
Contracts you signOneTwo or more
Who holds the architectThe builderYou
Who pays for drawing errorsThe builder, internallyUsually you, as a change order
Price certainty at startLater, after design developsEarlier, once plans are complete
Ability to competitively bid the buildLimitedFull, on a fixed plan set
Speed to permitUsually faster, overlapping phasesUsually slower, sequential phases
Best fitComplex or unknown scope, ADUs, additionsWell defined scope with a finished plan set

What to ask before you sign either one

  1. Who holds the contract with the architect and engineer? Get the name. Get the license number.
  2. What is in the design fee and what is extra? Structural calculations, Title 24 energy compliance, a survey, a soils report and plan check revisions are separate line items on many proposals.
  3. Who pays for plan check corrections? LADBS corrections are normal. Whose cost they are is a contract term, not a courtesy.
  4. What is the price at this stage and what is it not? A design build number before design development is a range. Ask what turns it into a fixed contract price.
  5. What is the trade list? Under a Class B, every specialty trade is a licensed subcontractor. Ask to see the classifications.

FAQ

Is design build cheaper than hiring a general contractor separately? Not inherently. It usually costs less in change orders and takes less time, and it usually gives you less price competition. Which one wins depends on how well defined your scope was at the start.

Can a general contractor also do the design? Yes, within the B&P 5537 limits above, and by employing or retaining a licensed design professional for anything beyond them. What matters is who is contractually responsible for the drawings.

Do I need an architect for an ADU in Los Angeles? Not automatically. A single-story woodframe ADU can fall inside the 5537 exemption. A raised roof, an unusual span or a hillside lot generally does not.

Who submits to LADBS? Whoever your contract says. On design build it is normally the builder. On design bid build it is normally the design professional. If nobody has been named, that is the first thing to fix.

Which model is faster to permit? Design build, usually, because design and preconstruction overlap. The gain disappears if the design professional is not actually engaged until after the contract is signed.

Related reading

How EMR runs it

EMR Heritage Build Co. is a licensed California Class B general contractor, CSLB #1156160, working in the San Fernando Valley, Santa Clarita and Los Angeles. Design partners are named in writing before the contract is signed, the trade list shows every classification, and scope changes only move on a signed change order. No verbal deals, and every claim on this page is one you can check.

Start with a free written estimate range for an ADU or garage conversion, or see the same approach on a bathroom remodel.

Planning a project in the Valley or Santa Clarita?

Tell us about it online and get a free written estimate range within 2 business days, before anyone comes to your house.

CallTextFree Estimate