Call us(818) 812-0735 Free Estimate
ADUsKitchensBathroomsService AreasFinancingBlogContactCall (818) 812-0735Get My Free Estimate Range

Home  /  Blog  /  Article

October 4, 2026

Open Versus Closed Floorplans: Which Fits?

For most Los Angeles remodels, open versus closed floorplans is not a style vote. It is a budget, structure, mechanical, and daily-use decision. Opening a wall can improve sightlines, but it can also trigger engineered framing, HVAC relocation, electrical work, and permit review that a closed layout avoids.

A homeowner should decide after confirming what the existing wall carries, what runs through it, and how the household actually uses sound, storage, cooking, and privacy. Those answers matter more than a floorplan trend.

Open versus closed floorplans: which costs more to remodel?

An open layout usually costs more when it requires removing or altering a structural wall. The visible demolition is often one of the smaller parts of the scope. The cost drivers are the work required to make the house safe and code-compliant after the wall is gone.

In a typical San Fernando Valley kitchen-to-living-room opening, the written scope may need to account for investigation, temporary support, structural plans if required, a beam or other framing detail, new posts and footings if called for, drywall repair, flooring patches, electrical relocation, lighting changes, HVAC work, paint, and final inspections. If plumbing or gas is in the wall, that is a separate coordination issue.

A closed layout can still be a substantial remodel. A kitchen renovation behind existing walls may involve new cabinets, appliances, branch-circuit upgrades, plumbing, ventilation, drywall, finishes, and permits. But retaining the wall can avoid the structural scope, along with some of the finish work that follows a large opening.

Do not compare a contractor's "wall removal" allowance against another contractor's remodel total. Compare itemized scopes. One proposal may include framing engineering and patching; another may leave those items for later. That is how a low initial number turns into a disputed change order.

Scope itemOpen-plan impactClosed-plan impact
Existing wallMay require demolition, temporary support, and structural verificationUsually retained and repaired only where needed
ElectricalReceptacles, switches, and circuits may need relocationChanges can remain concentrated in the remodeled room
HVACSupply, return, or duct routing may need redesignExisting room-by-room zoning may remain more practical
FinishesFlooring, ceiling, and wall patches extend into adjoining roomsFinish work is generally contained within the room
PermittingStructural changes typically require plans and reviewPermit scope depends on the renovation work, not layout alone

For 2026 planning, ask for pricing broken into these line items rather than accepting a single allowance. The final number depends on field conditions, selected materials, structural design, city requirements, and whether prior work is uncovered behind the walls. No responsible California contractor can price an unknown beam, footing, or concealed utility from a listing photo.

Do you need a permit to remove a wall in Los Angeles?

If the wall is structural, permit review is generally part of the work. In the City of Los Angeles, LADBS reviews plans and issues permits for residential alterations within its jurisdiction. Other areas have different authorities: Burbank, Glendale, Pasadena, Santa Clarita, and unincorporated Los Angeles County each use their own building departments and procedures.

The determining question is not whether the wall "looks structural." It is whether it supports roof, ceiling, floor, or lateral loads, or whether the planned work changes regulated systems. A qualified design professional or structural engineer may need to identify the load path and provide details for the proposed opening. The jurisdiction reviewing the plans determines what it requires.

Existing garage-adjacent walls deserve additional caution. California Residential Code Section R302.6 addresses separation between a dwelling and an attached garage, while Section R302.5 addresses opening protection between the garage and residence. A garage conversion or an opening near that separation is not a standard interior-wall decision. The applicable plans must preserve required fire-resistance and opening protection details.

Electrical changes must also be documented. Removing a wall can eliminate required receptacle locations, move kitchen small-appliance circuits, or affect lighting controls. The California Electrical Code requirements apply to the permitted electrical scope, and the inspector reviews the installed work, not the homeowner's original layout sketch.

What do homeowners give up with an open plan?

Open rooms make it easier to see across the main living area. They also let sound, cooking odors, screen light, clutter, and temperature differences travel farther. For a family with children doing homework while someone cooks, those trade-offs are not minor.

A closed or partially closed plan can provide better acoustic separation and more usable wall area. That wall area matters for tall pantry cabinets, a refrigerator, art, media equipment, bookcases, and furniture placement. In a smaller home, removing too many walls can create a larger-looking room while reducing storage and leaving fewer places for everyday life.

Kitchen ventilation is another practical test. A range hood should discharge outdoors where the design and applicable code require it. In an open kitchen, the hood's capture performance, duct route, makeup-air considerations where applicable, and noise level deserve more attention because cooking air spreads into the living space. A decorative hood selection is not a ventilation plan.

Heating and cooling can change as well. A formerly separate dining room may have had a supply register sized for that room. Once it joins the kitchen and living room, the load pattern changes. Before closing walls, confirm the HVAC plan, return-air path, and register locations with the licensed trade partner responsible for that work.

Is a partially open floorplan the better answer?

Often, yes. A widened cased opening, pass-through, interior window, or strategically placed opening can improve light and connection without turning three rooms into one undifferentiated space. It can also preserve a location for cabinets and reduce the amount of structural and finish work.

This approach works particularly well in older Valley homes where the kitchen is undersized but the adjacent dining room still serves a real purpose. Instead of removing every boundary, the design can create a clear visual connection while maintaining zones for dining, working, or quiet conversation.

The right layout depends on the home's framing and on household behavior. A couple who entertains weekly may value an open kitchen. A household with shift workers, school-age children, or frequent remote meetings may place a higher value on doors and acoustic separation. Neither answer is universally better.

What should be in the written scope before a wall comes down?

Before demolition begins, the scope should identify the wall location, the planned opening dimensions, investigation assumptions, permit responsibility, structural-design responsibility where required, electrical and HVAC impacts, finish restoration, inspection sequence, and exclusions. If an existing condition changes the scope, the contractor should document it with photos and price the correction through a signed change order before work begins.

California Business and Professions Code Section 7159 sets requirements for home improvement contracts, including written contract information and payment-schedule requirements. California Business and Professions Code Section 7159.5 limits the down payment on a home improvement contract to $1,000 or 10 percent of the contract price, whichever is less, subject to statutory exceptions. Homeowners should expect the contract, scope, plans, and changes to agree with each other.

For a project involving coordinated trades, use one accountable general contractor. Confirm the contractor's CSLB license status, workers' compensation coverage as applicable, insurance, and the license status of specialty trades performing regulated work. EMR Heritage Build Co. operates under CSLB #1156160 and documents scopes and change orders in writing rather than relying on verbal promises.

FAQ

Can I remove a wall without knowing whether it is load-bearing?

No. The wall's role must be verified before demolition. A wall may carry roof, ceiling, floor, or lateral loads even when it appears to be a simple partition. Concealed electrical, plumbing, HVAC, and gas work must also be located and addressed.

Will opening a kitchen wall always require structural engineering?

Not always. It depends on the existing framing, the proposed opening, and the requirements of the jurisdiction reviewing the plans. If the wall carries load or affects a lateral-force-resisting element, structural documentation may be required.

Does an open kitchen add value to a Los Angeles home?

It can improve buyer appeal for some homes, but resale should not be the only reason to remove a wall. The better test is whether the revised layout improves your use of the house without creating a compromised kitchen, weak storage plan, or avoidable construction cost.

How long does a wall-opening project take?

The construction duration depends on design, plan review, permit issuance, engineering, material lead times, inspection availability, and concealed conditions. A wall opening included inside a full kitchen remodel should be scheduled as part of the complete project, not treated as a one-day demolition event.

Before choosing a layout, stand in the rooms at the times you actually use them: breakfast, homework, cooking, television, and work calls. Then ask for an itemized written scope that prices the house you have, not a simplified rendering. That is the point where an open-plan idea becomes a buildable decision.

Planning a project in the Valley or Santa Clarita?

Tell us about it online and get a free written estimate range within 2 business days, before anyone comes to your house.

CallTextFree Estimate