Call us(818) 812-0735 Free Estimate
ADUsKitchensBathroomsService AreasFinancingBlogContactCall (818) 812-0735Get My Free Estimate Range

Home  /  Blog  /  Article

September 2, 2026

How to Compare Contractor Estimates Without Getting Fooled

Short answer: you cannot compare three numbers until the three numbers describe the same job. The gap between a low bid and a high bid is almost never labor rate. It is scope, allowances, and exclusions. Normalize those three things first, and the comparison usually answers itself.

Here is the method I would use if I were the homeowner, in the order I would use it.

I am Carlos Vasquez, owner of EMR Heritage Build Co., a Class B general contractor licensed by the CSLB, #1156160. I am telling you how to compare my proposal against someone else's, which should tell you something about how we write ours.

Step 1: Two checks before you read a single number

Verify the license. Go to the CSLB's Check a License tool. If you have the number, cslb.ca.gov/ followed by the license number goes straight to the detail page. Confirm the license is current and active, that the classification covers the work, that a contractor's bond is on file, and that workers' compensation is either carried or a valid exemption is filed.

This is not a formality. Under Business and Professions Code 7031(b), "a person who utilizes the services of an unlicensed contractor may bring an action in any court of competent jurisdiction in this state to recover all compensation paid to the unlicensed contractor." An unlicensed contractor also cannot sue you for payment at all. That asymmetry exists because the legislature wanted homeowners to check.

Note that a suspended license counts as unlicensed. CSLB states that any work performed while a license is suspended is considered unlicensed work, and a lapsed workers' compensation policy is one of the things that suspends a license.

Confirm the bid is even legal in form. Under B&P 7159, a home improvement contract over $500 must be in writing and must contain specific items: the contractor's name, address and license number, the contract price, a description of the project and the significant materials, approximate start and completion dates, a schedule of progress payments describing each phase, a change order provision, a mechanics lien warning, and disclosures of whether the contractor carries commercial general liability and workers' compensation insurance.

A proposal that is one page and one number is not a contract, and a contractor who hands you one is telling you how the rest of the job will be documented.

Step 2: Build one scope, then price it three ways

The real problem with three bids is that each contractor scoped the job themselves. You are comparing three different projects.

Fix it by writing the scope once, yourself, and sending the same document to everyone. It does not need to be technical. It needs to be decided.

For a bathroom, that means naming: which bathroom, whether anything moves, whether the tub goes, what happens to the flooring outside the door, whether the ceiling gets repaired, and who buys the fixtures. For a kitchen: whether walls change, whether the sink or range relocates, and what the appliance package is. For an addition or ADU: the size, the use, and whether plans and engineering are inside or outside the price.

Then ask every bidder to price that document and to list anything they are excluding from it.

Step 3: Normalize the four things that hide the difference

Allowances. An allowance is a placeholder dollar amount for something you have not chosen yet. It is legitimate and often necessary. It is also the easiest way to make a bid look cheap.

Ask for allowances by category, not as one lump: tile, plumbing fixtures, vanity, countertop, lighting, appliances, flooring. Then ask what product level each allowance assumes, and whether labor is included if your final selection needs more installation work. Two bids with identical allowance totals can assume completely different products.

Get in writing what happens if you go over, and what happens if you come in under. A credit that is not documented does not exist.

Exclusions. Read this section before the price. If it is missing, that is the finding. Common exclusions that cost real money later: permits and permit fees, plans, structural engineering, energy documentation, city corrections, debris haul-off, final cleanup, painting, and anything discovered behind a wall.

Permits and soft costs. Ask directly: are plans, engineering, Title 24 documentation, permit fees, corrections and inspections inside the contract price or outside it? On a Los Angeles job those can be a meaningful line, and they are the most commonly omitted item in a low bid.

Concealed conditions. Nobody can see inside your walls. The question is not whether a contractor guarantees no surprises, it is what happens when there is one. A good proposal states the assumptions it made about existing conditions, and describes the process for pricing what is found.

Step 4: Look at the payment schedule, not just the total

California sets hard rules here, and a bid that breaks them is disqualifying on its own.

Your down payment cannot exceed $1,000 or 10 percent of the contract price, whichever is less. That is B&P 7159.5(a)(3), and the contract has to carry the notice in 12-point boldface. There is a narrow exception for a contractor who furnishes an approved blanket performance and payment bond, and that is the only one.

After the down payment, a contractor may not request or accept a payment that exceeds the value of work already performed or materials already delivered. The schedule of progress payments has to describe each phase, the work in it, and the payment amount, and carry the warning that it is against the law to collect for work not yet completed.

Violating those rules is a misdemeanor under 7159.5(b)(1). If a bidder wants 40 percent up front for materials, you have learned something more useful than a price.

Step 5: Ask about the crew

Since January 1, 2026, SB 517 requires a home improvement contract to carry a yes/no checkbox stating whether subcontractors will be used, and if yes, a disclaimer that a list of subcontractors with names, contact information, license numbers and classifications will be provided on request.

Ask for that list. Then check the license numbers the same way you checked the general contractor's. A general contractor who coordinates licensed trade partners under one contract and one point of accountability is a different proposition from a loose collection of workers, and the price difference between the two is usually the accountability.

While you are on the license page, note the Personnel block. CSLB automatically prints a note when personnel on a license are also listed on other licenses. That is a signal worth understanding rather than a red flag on its own.

Step 6: Understand what the bond and the insurance actually are

Two things get misrepresented constantly.

The $25,000 contractor's bond is not insurance. It is a surety instrument, shared across all claimants, and it is not sized to make you whole on a bad remodel. It is a real remedy and a real signal, but it is not coverage.

CSLB does not require a contractor to carry general liability insurance. It requires the contract to disclose whether the contractor carries it, and if so, to name the carrier and give you a phone number to verify coverage. So ask for a certificate of insurance, and call the carrier. Do not accept "we're bonded and insured" as an answer, because half of that sentence is a legal requirement and the other half might be nothing.

Ignore anything you read claiming all California contractors must carry workers' compensation as of January 1, 2026. SB 1455 moved that universal requirement to January 1, 2028. Today it applies to contractors with employees, plus C-8, C-20, C-22, C-39 and C-61/D-49 licensees regardless.

Step 7: Now compare

With one scope, category allowances, explicit exclusions, a legal payment schedule and verified licenses, the three numbers finally mean something. What usually emerges:

  • The low bid is low because something is missing. Find it, add it back, and re-rank.
  • The high bid is high because it included something the others left out, or because it is priced for a level of project management the others are not offering.
  • The bid in the middle is often the only one that was actually read.

The lowest number is only the lowest cost if it covers the same work and reaches the same finished result.

Frequently asked questions

How many contractor estimates should I get? Enough to see a pattern, which for most homeowners is three. More than that stops producing information and starts producing noise, especially if the scope is not normalized.

What is the difference between an estimate and a quote? In practice, an estimate is a range based on incomplete information and a quote or proposal is a priced offer against a defined scope. Neither term is legally defined in California. What matters legally is the written home improvement contract, which is where the description of the project, the price, and the payment schedule have to appear.

Is it rude to send my scope to several contractors? No. It is the most respectful thing you can do, because it stops four people from spending unpaid hours guessing at the same project differently.

What if a contractor will not put exclusions in writing? That is your answer.

Can an unlicensed person legally do small jobs? Only under B&P 7048, where the aggregate contract price for labor and materials is under $1,000, the work is casual or minor, and it requires no building permit. Splitting a larger job into sub-$1,000 contracts to evade licensure is expressly prohibited, and hiring anyone to help voids the exemption. Separately, under B&P 7027.2 an unlicensed person may advertise for that work only by disclosing in the advertisement that they are not licensed.

How we bid

We send a free written estimate range within two business days of your request, then an itemized written scope within 2 business days of the on-site design consultation, with allowances by category and exclusions listed. Both are free. Detailed plans and permit work are paid. No verbal deals.

If our number is higher than someone else's, the scope document is where you find out why.

Request an estimate range

Related: what California law requires in your remodel contract and how to verify a California contractor license.

Planning a project in the Valley or Santa Clarita?

Tell us about it online and get a free written estimate range within 2 business days, before anyone comes to your house.

CallTextFree Estimate